Breaking

Sunday 13 November 2016

How to install spreadtrum SPD usb drivers


This is a simple tutorial on how to install spd usb drivers
Before we take our journey on the installation of spd driver, it is very important to know what USB driver are.

USB drivers

USB drivers are like a link or let say a bridge that connect communication between two devices. Without the USB drivers the phone or any device will not be detected by the computer. Now let look at the sep by step tutorial on How to install SPD drivers
1.This first step to is to download the driver HERE
2. Extract or unzip the spd driver



3. Open the device manager or press Win+ R to launch the cmd and type devgmt.msc



4. Once open, click on the pc name
5.Now, click on the add legacy hardware





6. Click on the next to continue



7. Select install the hardware that manually from a list ( Advance)



8. click on show all Devices


9. Click on Have Disk



10. browse the location of the folder you just unzip in step one
11. locate the driver folder and select 32bit or 64bit depending on the PC
12. Select SciU2s.INF and click on the open



13. Once the driver is listed in the black are, click on the NEXT to continue



14. OK. click on the Next



15. You are almost done. verify the security Dialog box to allow window to install the driver
16. Finally, click on the finish



17. You will now see the spreadtrum driver in the installed list in the device manager






Very important Note: SPD driver are made to only work on Spreadtrum Chipset, which allow you to flash stock firmware using SPD flash tools
This drivers are not digitally signed. if You have any error, you will need to fix the driver signature enforcement manually. Learn How to here
The spreadtrum driver is provided by the spreadtrum inc officially and full credit goes to them.

If you find this tutorial helpful, please kindly share it.

No comments: