Tecno Spark 3 Pro KB8 FACTORY FIRMWARE DOWNLOAD

On this page, you will find the direct link to download the TECNO Spark 3 Pro KB8 firmware/Stock Rom. 

if you are an experienced software repair engineer, you can go straight to the download button that is at the end of the post to so as to save time. However, if you new or upcoming technician you should consider reading the whole post so as to avoid unnecessary damage or bricks.

Requirement before flashing for flashing TECNOSpark 3 Pro KB8  Factory   firmware

1. The device firmware
2. The chipset flash tools
3. The chipset or device driver 
4. Good USB cable
5. Your computer

Procedure for flashing TECNO Spark 3 Pro KB8

1. Install Winrar Software in your Computer or Laptop, if already installed then i
2. Download  ITEL TECNO Spark 3 Pro KB8  Factory firmware/Stock Rom for flash file from the link provided below
3. Extract to as you like path better is desktop for easy understanding
4. Open SP Flash Tool folder and choose file and open it
5. Choose Click Scatter-loading button and select txt 
6. If device dead or not detect then try with Volume UP button and Insert USB cable (Note: you can use the Volume Down button also for detecting not working Up key)
7. Wait until the finished process, do not try to unplug the device while in flashing mode
8. Congrats you have successfully flash TECNO Spark 3 Pro KB8 Factory firmware/Stock Rom

Download ITEL TECNO Spark 3 Pro KB8 Factory firmware/Stock Rom

To download the firmware that matches with your device, ensure you check the Build -Number

or

Read the Build-Number with miracle box

 firmware

 TECNO Spark 3 Pro KB8 FIRMWARE

KB8-H624BNPQ-P-190424V179

NO PASSWORD

DOWNLOAD

CREDIT TO HOVATEK

IS'T IT AMAZING TO A WEBSITE WHERE YOU CAN DOWNLOAD ALL YOUR FIRMWARE WITHOUT PASSING THROUGH MANY ADS. WHY DONT YOU BOOKMARK US FOR EASY ACCESS IN CASE YOU WILL NEED FIRMWARE AGAIN